Silicone Active carbon filter 18.8 by Heisenberg

Heisenberg silicone active carbon filter for 18 8 bongs

The Heisenberg silicone active carbon filter is insensitive to impact damage (even from great heights) and gentle on ground glass joints, as there is no abrasion. The filter insert is tasteless, dimensionally stable and insensitive to temperature influences caused by extreme heat and cold. This makes it suitable for outdoor use as well as for use on the road.

It can be inserted into all commercially available products such as bongs, beakers and bubblers with a female 18.8 glass ground joint. Combine the activated carbon filter with various smoking devices and as an extension to other accessories such as pre-coolers, various bong bowl pieces or distance adapters.

Use of the silicone active carbon filter in 3 easy steps

1. Open & insert sieve - The active carbon filter consists of 2 parts, which are plugged together in the middle. Open the carbon filter by squeezing it together and pulling the top part with the Heisenberg logo off the bottom end. Then insert a 20mm diameter sieve on the protrusion inside the filter.
   Please note: Only open the filter by hand and avoid using sharp-edged tools to avoid damaging the silicone.
2. Fill in activated carbon - Now fill in the carbon granules. The filter has a filling volume of approx. 6-7g of activated carbon. As a rule of thumb, the maximum filling threshold is reached just before the edge of the filter.
3. Insert the filter into the 18.8mm joint - Place the activated carbon filter into the 18.8mm joint of the bong / coupling. Be careful not to hold the activated carbon filter the wrong way round, otherwise the carbon granules will fall out. For this reason, the filter is not suitable for use with male 18mm couplings.

Scope of delivery:
- 1x Heisenberg Silicone activated carbon filter
Note: Sieves with Ø20mm must be purchased separately